AMAT vs KLIC: Which Is the Better Buy in 2026?
Last updated November 2026
Short answer
AMAT is the larger of the two ($242.13B market cap): the incumbent the market prices for continued execution (12.39x forward earnings, beta 1.67). KLIC is the smaller challenger ($2.91B), cheaper on forward earnings (7.27x): more room to run, but more to prove. If you believe in growth, AMAT fits: analysts expect its revenue to rise 21% next year, against 7% for KLIC. If you believe in paying less for profit, KLIC fits: it trades at 7.27x forward earnings, against 12.39x for AMAT.
AMAT vs KLIC: the tie-breaker metrics
Same yardstick, side by side (as of November 2026). Valuation lined up like this is most meaningful for two names in the same corner of the market, which these are. Figures are approximate; verify before investing.
| Metric | AMAT | KLIC | What it tells you |
|---|---|---|---|
| Market cap | $242.13B | $2.91B | Size. The larger name is the incumbent; the smaller has more room to grow and more to prove. |
| Forward P/E | 12.39 | 7.27 | Valuation on next year's expected earnings, the same yardstick for both. Lower is cheaper for that growth; higher means the market is paying up. |
| Trailing P/E | 24.18 | 16.27 | Valuation on the last 12 months. A big drop from trailing to forward means the market expects earnings to jump, so more growth is already in the price. |
| Beta | 1.67 | 1.66 | Volatility vs the market. Above 1 swings harder than the index; below 1 is steadier. Higher beta means bigger drawdowns to hold through. |
| Price vs 52-week range | 17% of range | 17% of range | Where today's price sits between the 52-week low and high. Near the high is momentum with less margin of safety; near the low is out of favor or a discount, depending on why. |
| Price / book | 9.27 | 2.96 | How much you pay over book value. Very high can signal an asset-light, high-return business or a rich price. |
Reading it: KLIC is the cheaper of the two on forward earnings, but cheaper is not the same as better. Pair the valuation with growth (how far the forward P/E sits below the trailing P/E) and risk (beta) before you decide.
Before you buy: how AMAT and KLIC affect your concentration
The metrics above tell you which is the marginally better business. The bigger risk for most people is not picking the slightly worse stock, it is over-concentrating. AMAT and KLIC share themes, so owning both, or adding either to what you already hold, can quietly push a large share of your portfolio into one bet.
This is the part a generic comparison page cannot answer, because it depends on what you own. Connect your brokerage and Walnut shows your real, combined AMAT and KLIC exposure, flags overlap with your existing positions, and tells you if adding one would tip you past a concentration you are comfortable with, read-only by default, with your login staying at your broker. Walnut is not an investment adviser.
What does Applied Materials (AMAT) do?
Applied Materials is the largest semiconductor equipment company in the world by revenue. The company manufactures the wafer fabrication equipment that semiconductor fabs use to deposit, etch, polish, and inspect silicon wafers. AMAT does not make lithography systems (ASML has that monopoly) but is essentially everywhere else in the fab equipment market.
What does Kulicke & Soffa Industries (KLIC) do?
Kulicke & Soffa Industries (KLIC) designs and sells the capital equipment used to assemble and package finished semiconductors, most notably wire bonders that connect chips to their packages. The company is the clear leader in traditional wire bonding with an estimated global share above 60%, and it also sells wedge bonding, thermo-compression bonding, advanced-packaging tools, and consumables plus services to outsourced assembly and test houses (OSATs) and chipmakers. Its APTURA thermocompression platform targets leading-edge copper-to-copper and hybrid-bond-adjacent applications tied to AI logic and high-bandwidth memory, and in October 2026 its fluxless thermocompression bonding technology received a SEMI award for North America. On November 18, 2026 it also announced a push into panel-level capability for AI applications.
AMAT vs KLIC: how do they differ?
Both fit overlapping themes, but they are not interchangeable. Here is what each one depends on.
- AMAT drivers: Leading-edge logic and memory capex; Trailing-edge capacity expansion.
- KLIC drivers: Assembly capex recovery; Wire-bonding dominance and installed base.
Which fits which kind of investor
A faster-growing, richer-valued name usually swings harder, so it suits a longer horizon and a higher tolerance for volatility; a steadier, more cash-generative business suits a more conservative or income-minded investor. A useful test is which set of risks you could hold through a drawdown: Semiconductor capex is cyclical. For KLIC, revenue is deeply cyclical and concentrated in semiconductor assembly end-markets, so a stall in the current recovery could quickly compress earnings again; the stock's roughly 34% drop over the three months to November 20, 2026, including about 24% in the last month despite a fourth-quarter beat, shows how fast sentiment can swing.
AMAT or KLIC: which should you pick?
If the story you believe is AMAT's (Leading-edge logic and memory capex), AMAT is the more direct way to own it; if it is KLIC's (Assembly capex recovery), KLIC is. Many investors hold both, but since they share themes, that is a concentrated bet, not diversification. Decide deliberately and check overlap. For the full detail, see the AMAT and KLIC guides.
AMAT vs KLIC: the full fundamentals
AMAT. As of November 20, 2026, AMAT trades at about 24x trailing earnings and roughly 12x forward earnings (on fiscal 2028 estimates), with a price-to-sales ratio near 7x, down from 36x trailing in mid-October as the share price fell faster than estimates. The fiscal Q4 report beat on EPS ($4.16 vs ~$4.05) with revenue up about 53%, and consensus for fiscal Q1 2027 (expected around February 11, 2027) is EPS of ~$4.37 on ~$11.1 billion of revenue. The 36 analysts covering the stock rate it a strong buy on average, with a mean target near $558.
KLIC. The trailing P/E has fallen from about 99 in May and about 37 in October to about 16 as fiscal 2026 earnings arrived and the share price dropped, and the forward multiple near 7 prices in analyst expectations of roughly $7.11 of EPS in fiscal 2027 and $7.65 in fiscal 2028. The stock is up about 16% in 2026 but about 59% below its 52-week high of about $136. A large net cash position and a dividend paid since 2018 still provide downside support relative to smaller equipment peers.
Headline figures (approximate, November 2026): AMAT shows revenue (fy2026, ended oct. 25) ~$34.5 billion, revenue growth (latest quarter, yoy) ~53%, operating margin ~33%, net income (ttm) ~$10.1 billion; KLIC shows revenue (fiscal 2026) ~$1.18B (up ~81% from ~$654M), revenue (fiscal q4 2026) ~$410M (up ~131% YoY), margins (fiscal 2026) ~48% gross, ~18% operating, ~15% net, net income (fiscal 2026) ~$183M (GAAP EPS ~$3.42).
The bottom line: AMAT vs KLIC
AMAT and KLIC are related but distinct: same themes, different businesses and risks. Neither wins in the abstract, and whichever you pick is worth sizing so one theme does not take over your portfolio. Walnut can show your combined AMAT and KLIC exposure against your real portfolio. It is not an investment adviser.
Wondering how AMAT or KLIC fits the portfolio you already own? Walnut is an AI investing app that connects your brokerage read-only and answers questions like that about your actual holdings: overlap, concentration, and how each position tracks the S&P 500. Compare the best AI portfolio analyzers or see the best AI investing apps in 2026.
Your questions about Applied Materials
Ask Walnut's AI anything about AMAT and see how it fits what you own.
FAQ
What is the difference between AMAT and KLIC?
+
Applied Materials is the largest semiconductor equipment company in the world by revenue. Kulicke & Soffa Industries (KLIC) designs and sells the capital equipment used to assemble and package finished semiconductors, most notably wire bonders that connect chips to their packages. They show up together because they share investment themes, but they are different businesses, so the better fit depends on which thesis you are expressing.
Is AMAT or KLIC the better stock?
+
Neither is universally better. AMAT is the larger incumbent; KLIC is the smaller challenger and looks cheaper on forward earnings. Walnut is informational, not investment advice. Compare what each does, the tie-breaker metrics above, and the risks, then decide which fits your thesis and what you already own.
Which is cheaper, AMAT or KLIC?
+
On forward P/E (as of November 2026), AMAT trades at 12.39x and KLIC at 7.27x, so KLIC is the cheaper of the two on next year's expected earnings. A lower multiple is not automatically the better buy: a richer valuation can be justified by faster growth, and a lower one can reflect real risk. Weigh the multiple against how fast each business is compounding.
Should you own both AMAT and KLIC?
+
Because they share themes, owning both concentrates you in that theme. That can be intentional (a focused bet) or accidental (less diversification than it looks). Walnut can show your combined exposure across both, and whether adding either over-concentrates you, before you buy.
What are the risks of AMAT vs KLIC?
+
AMAT: Semiconductor capex is cyclical. China exposure (where export controls have already cut some revenue) is the largest single near-term risk; further restrictions could expand. Valuation and sentiment have proven a risk of their own: the stock ran from a 52-week low of ~$216 to ~$740 and then fell about 36.5% over three months to $305 by November 20, 2026, with several brokers, most recently Daiwa, cutting price targets. Consensus still assumes fiscal 2027 EPS of ~$19.30 (up about 50%) on ~$48 billion of revenue and fiscal Q1 EPS of ~$4.37, so any sign that AI or memory capex is slowing would land against high expectations. Free cash flow of ~$2.5 billion trailing is well below net income of ~$10.1 billion, a gap worth watching as the company spends on capacity, inventory and R&D. KLIC: Revenue is deeply cyclical and concentrated in semiconductor assembly end-markets, so a stall in the current recovery could quickly compress earnings again; the stock's roughly 34% drop over the three months to November 20, 2026, including about 24% in the last month despite a fourth-quarter beat, shows how fast sentiment can swing. Guidance for a flat December quarter suggests the steep sequential growth of fiscal 2026 is leveling off. In advanced packaging, K&S is widely viewed as more of a follower than a leader, with BE Semiconductor (Besi) and ASMPT often winning high-end AI and logic bonding on process control and speed-to-market. Front-end giants like Applied Materials and Tokyo Electron moving into packaging add competitive pressure. Customer concentration, acquisition-integration risk, and supply constraints for precision components are additional exposures. Cash conversion also lagged profits in fiscal 2026: operating cash flow was about $72 million against about $183 million of net income. Finally, the forward multiple of about 7 assumes earnings keep climbing toward analyst targets, and the three analysts in Yahoo's count rate the stock a hold with a mean target near $77.
Related comparisons
Browse all stock comparisons.
Walnut is informational, not investment advice. This page is descriptive and not a recommendation to buy or sell AMAT or KLIC; figures are approximate and dated (as of November 2026). Verify current data before investing.