Velo3D, Inc. (VELO) Stock Price & How to Invest

Last updated November 2026

Short answer

You can invest in Velo3D (VELO) by buying shares or fractional shares at any major US broker, through an ETF that holds it, or as one holding in a focused 3d printing basket. Velo3D makes metal 3D printers designed to produce parts with geometries that normally require support structures, aimed at aerospace, defence and energy customers printing complex components. As of October 16, 2026 the stock closed near $6.93 (market value ~$223 million), down about 58% year to date after a volatile run, even as revenue has grown roughly 50% a year. Figures on this page are approximate; verify current numbers before deciding. Walnut is not an investment adviser.

VELO stock price

As of 2026-11-16, Velo3D, Inc. (VELO) last closed at $3.55, down 18.5% over the past year. Over the past 52 weeks it has traded between $3.55 and $30.61.

VELO last close
$3.55
1 day
-14.58%
1 month
-47.83%
1 year
-18.51%
52-week range
$3.55 to $30.61
Last close
2026-11-16

Prices are daily closing prices from Yahoo Finance and may be delayed. For the live quote, check your broker or Velo3D, Inc.'s investor relations page. Walnut is informational, not investment advice.

VELO key stats

At $3.55 on November 16, 2026, Velo3D, Inc. (VELO) has a market cap of $114M.

Market cap
$114M
Price to book
0.8
Beta
2.62

Market cap, P/E and yield are measured at the $3.55 price on November 16, 2026, from Yahoo Finance figures pulled in November 2026. Earnings date from Yahoo Finance. Walnut is informational, not investment advice.

What's new with Velo3D, Inc. (VELO)?

The last two weeks for Velo3D, Inc., as of November 17, 2026: the price move, the next earnings date, what the company filed with the SEC, and what analysts changed.

  • VELO closed at $3.55 on November 16, 2026, down 43.1% over the past five trading days (from $6.23).
  • On November 10, 2026, Velo3D, Inc. filed its quarterly report (10-Q) with the SEC. Read the 10-Q on sec.gov
  • On November 10, 2026, Velo3D, Inc. filed an 8-K with the SEC reporting quarterly results (Item 2.02). Read the 8-K on sec.gov

Prices are daily closes from Yahoo Finance. Filings are read from SEC EDGAR every six hours. Analyst actions come from Yahoo Finance as of November 2026. Walnut is informational, not investment advice.

What does Velo3D, Inc. (VELO) do?

Velo3D makes metal 3D printers designed to produce parts with geometries that normally require support structures, aimed at aerospace, defence and energy customers printing complex components. Alongside selling systems it runs a production-parts business (referred to as RPS), and much of its 2026 investment is going into expanding that printing capacity: the CEO has said the company needs about 100 machines to serve current demand and targets reaching that by mid-2028.

2026 has been a recovery year operationally. Q2 2026 revenue was about $20.7 million, up about 52% year over year and about 50% from Q1, gross margin improved to about 21.5% (from -11.7% a year earlier), and backlog roughly doubled to about $31 million. Cash rose to about $91 million at June 30, 2026 from about $39 million at the end of 2025, and debt was cut by more than 70% to about $8 million, helped by about $18.5 million of debt-to-equity conversions. Management raised 2026 revenue guidance to $65-75 million and said it expects gross margin above 30% and positive EBITDA in the second half. On October 15, 2026 it reported preliminary Q3 revenue of about $19.5-20.5 million, up about 43-51% year over year but roughly flat with Q2.

The stock tells a harsher story. Shares closed near $6.93 on October 16, 2026, down about 58% year to date and about 35% over the past month, after the CFO's departure was announced on October 5. Over one year the stock is still up about 20%, within a 52-week range of roughly $3.75 to $31.75. Trailing net loss is about $52 million on about $58 million of revenue. Velo3D is a speculative position rather than an established manufacturer. Verify the current cash position, customer concentration and share count before drawing any conclusion, as all three have moved materially.

What's driving Velo3D, Inc. (VELO)?

Support-free printing of difficult geometries

The technical claim is that its process can print low-angle overhangs and internal channels that conventional metal printers cannot without supports, which matters for rocket engines, heat exchangers and turbine parts. In October 2026 Velo3D and Mears announced dedicated US copper-nickel production capability, an example of the specialised alloys and parts it is targeting.

Aerospace and defence demand

Its customer concentration sits in space launch and defence, where part complexity justifies the cost and where domestic production capability is strategically valued. Management described defence demand in August 2026 as strong, citing stockpile concerns, unmanned vehicles and munitions programs, with space demand ramping on rocket engines. Velo3D joined GIDEP, a government-industry data exchange for defence quality and supply-chain programs, in September 2026.

Revenue growth and a path to positive EBITDA

Revenue rose about 52% in Q2 2026 to roughly $20.7 million, and preliminary Q3 revenue of $19.5-20.5 million implies 43-51% growth. Gross margin climbed to about 21.5% in Q2, and management guided to above 30% gross margin and positive EBITDA in the second half of 2026, with full-year revenue of $65-75 million. Analysts expect about $73 million of 2026 revenue and about $92 million in 2027, though they still model losses in both years.

A repaired balance sheet, still being spent

Cash rose to about $91 million by June 30, 2026 and debt fell to about $8 million after conversions to equity, which removed the most immediate funding pressure. Planned 2026 capex of $40-50 million, mostly for production-parts capacity, is subject to financing availability, so the pace of expansion depends on how long that cash lasts against continued operating losses.

What are the risks to Velo3D, Inc. (VELO)?

Velo3D is a small company that has faced serious financial pressure, including going-concern questions, restructuring and significant customer concentration, and its October 2026 preliminary results release still cites liquidity and going-concern risks and warns that it may miss or revise its fiscal 2026 guidance. Metal additive manufacturing has consistently grown more slowly than forecast. The company has raised capital repeatedly and converted debt to equity, diluting existing shareholders; trailing net loss is about $52 million and free cash flow about -$46 million. Preliminary Q3 revenue was roughly flat with Q2, the CFO departed in early October 2026, and the stock fell about 35% in the following month. Backlog may not convert to revenue on the expected timeline, and defence-related revenue can be delayed by funding shifts or government shutdowns. This is a speculative small-cap, not an established business.

What is the Velo3D, Inc. (VELO) forecast?

4 analysts publish price targets on VELO, averaging $23.25 as of November 2026, or +554.9% against the $3.55 share price on November 16, 2026. The published targets run from $17.00 to $33.00, a moderate spread, and the ratings split 4 buy, 0 hold, 0 sell. Over the last six months there have been 0 raises and 0 cuts among the published actions. A price target is what an analyst published on a date, not a prediction, and sell-side ratings skew positive across the whole market.

Read the full VELO forecast and price target for the target table, the recent rating actions by firm, and how the consensus has shifted.

Is VELO a buy or a sell?

We give no verdict on Velo3D, Inc.. Both cases are real, which is why the question is contested at all, so here is the strongest version of each.

The case for buying. Support-free printing of difficult geometries. The technical claim is that its process can print low-angle overhangs and internal channels that conventional metal printers cannot without supports, which matters for rocket engines, heat exchangers and turbine parts. The most optimistic published target, $33.00, assumes this works close to its best case.

The case against. Velo3D is a small company that has faced serious financial pressure, including going-concern questions, restructuring and significant customer concentration, and its October 2026 preliminary results release still cites liquidity and going-concern risks and warns that it may miss or revise its fiscal 2026 guidance. The most pessimistic target, $17.00, is roughly what VELO is worth if this bites instead.

Read the full bull and bear case on VELO, including what would have to change to break either one. Walnut is not an investment adviser.

Has Velo3D, Inc. (VELO) split its stock?

Yes. Velo3D, Inc. (VELO) has had 2 share splits in the last 10 years:

  • 1:35 on June 13, 2024, so every share held became 0.02857142857142857 shares.
  • 1:15 on July 28, 2025, so every share held became 0.06666666666666667 shares.

A split changes the share count and the price per share and leaves the value of a holding unchanged. Someone holding $1,000 of VELO the day before the 1:15 split held $1,000 the day after, in more shares at a proportionally lower price. Historical prices from before the date are normally shown split-adjusted, which is why a long-run chart shows no cliff.

Splits matter mainly because they make older price figures confusing to compare by hand, and because a board choosing to split is usually signalling that the price has run up far enough to feel awkward for smaller buyers. Neither is a reason to buy or sell.

How is Velo3D, Inc. (VELO) valued?

Market cap, P/E and dividend yield at today's price are in the VELO key stats above. The business figures below come from Velo3D, Inc.'s reported results as of October 2026 and change when it next reports.

  • Revenue (TTM): ~$58 million
  • Q2 2026 revenue: ~$20.7 million (+52% YoY)
  • Q3 2026 revenue (preliminary): ~$19.5-20.5 million (+43-51% YoY)
  • 2026 revenue guidance: ~$65-75 million
  • Net income (TTM): ~-$52 million
  • Cash (June 30, 2026): ~$91 million
  • Backlog (June 30, 2026): ~$31 million

As of October 2026: Velo3D is valued at roughly 3.9x trailing sales with no earnings, so the price rests on whether 50%-type revenue growth and the promised second-half move to positive EBITDA arrive before the cash raised in 2026 runs down. Full Q3 2026 results are expected the week of November 9, 2026. Velo3D is a speculative position rather than an established manufacturer; verify the current cash position, customer concentration and share count before drawing any conclusion.

What themes does Velo3D, Inc. (VELO) fit?

These are the investment theses VELO naturally fits into. Each links to a full theme guide listing every other stock that belongs and the ETFs commonly used as a passive proxy.

Who competes with Velo3D, Inc. (VELO)?

Metal additive systems

EOS, SLM Solutions, Nikon SLM and GE Additive compete in industrial metal printing with larger installed bases and stronger balance sheets. Desktop Metal addresses adjacent metal processes.

In-house production

Several large aerospace and launch customers have built their own additive capability rather than buying systems, which removes them as customers entirely.

What stocks are similar to Velo3D, Inc. (VELO)?

Other names that sit close to VELO: same theme, named as a direct competitor, or held beside it in the same funds. Each entry says which. They are useful if you want to spread one thesis across several tickers.

How to invest in Velo3D, Inc. (VELO)

There are three common ways to get VELO exposure. Buy shares (or fractional shares) directly at any major broker. Hold an ETF that includes it, which spreads the position across many companies. Or build it into a focused thematic portfolio, so VELO sits alongside other stocks that express the same thesis.

Walnut takes the portfolio route. Describe a thesis where VELO fits (for example “AI infrastructure” or “dividend-growth large-caps”) and the AI proposes 5 to 6 constituents with target weights. You review the plan and fund it through your own broker when you're ready.

New to this? Start with how to invest in stocks, see how to analyze a stock with AI, or compare the best AI stock analyzers.

The bottom line on Velo3D, Inc. (VELO)

Velo3D (VELO) is best understood through the 3d printing theme it belongs to. It is a speculative position rather than an established manufacturer: revenue is growing about 50% a year and the balance sheet was repaired in 2026 (about $91 million of cash at June 30), but the company still loses money, its CFO left in October 2026, and the shares have fallen from a 52-week high near $32 to about $7. Full Q3 results are expected the week of November 9, 2026.

More on Velo3D, Inc. (VELO)

Whether VELO is worth buying today depends more on your time horizon and what you already hold than on any single call. We walk through valuation, what would have to go right, and the risks in is VELO a buy or a sell?, and where the stock could go from here in the VELO stock forecast.

For income investors, whether VELO pays a dividend and how the payout looks is covered in does VELO pay a dividend? And to weigh VELO against a peer, read the full side-by-side comparisons: VELO vs DDD and VELO vs SSYS.

Wondering how VELO fits the portfolio you already own? Walnut is an AI investing app that connects your brokerage read-only and answers questions like that about your actual holdings: overlap, concentration, and how each position tracks the S&P 500. Compare the best AI portfolio analyzers or see the best AI investing apps in 2026.

Your questions about Velo3D, Inc.

Ask Walnut's AI anything about VELO and see how it fits what you own.

FAQ

What does Velo3D do?

+

Velo3D makes metal 3D printers designed to produce parts with geometries that normally require support structures, aimed at aerospace, defence and energy customers printing complex components.

Is VELO a good stock to buy?

+

That depends on your thesis, time horizon and what you already hold, not on any single call. The case and the risks are both set out on this page. Walnut is informational and not a registered investment adviser, so treat this as research rather than a recommendation.

Who competes with Velo3D?

+

Metal additive systems: EOS, SLM Solutions, Nikon SLM and GE Additive compete in industrial metal printing with larger installed bases and stronger balance sheets. Desktop Metal addresses adjacent metal processes. In-house production: Several large aerospace and launch customers have built their own additive capability rather than buying systems, which removes them as customers entirely.

What are the main risks of VELO?

+

Velo3D is a small company that has faced serious financial pressure, including going-concern questions, restructuring and significant customer concentration, and its October 2026 preliminary results release still cites liquidity and going-concern risks and warns that it may miss or revise its fiscal 2026 guidance. Metal additive manufacturing has consistently grown more slowly than forecast. The company has raised capital repeatedly and converted debt to equity, diluting existing shareholders; trailing net loss is about $52 million and free cash flow about -$46 million. Preliminary Q3 revenue was roughly flat with Q2, the CFO departed in early October 2026, and the stock fell about 35% in the following month. Backlog may not convert to revenue on the expected timeline, and defence-related revenue can be delayed by funding shifts or government shutdowns. This is a speculative small-cap, not an established business.

Does VELO pay a dividend?

+

No. Velo3D does not pay a dividend; it is loss-making (trailing net loss of about $52 million) and is spending its cash on production capacity. Figures are pulled from market data and are approximate; verify with your broker.

How do I buy VELO shares?

+

Open an account at any major US broker, search for VELO, and place a buy order. Most brokers support fractional shares, so you can invest a fixed dollar amount rather than buying whole shares. Walnut connects to the broker you already use rather than holding your money itself.

What theme does VELO belong to?

+

Velo3D sits in the 3d printing theme, which groups the companies exposed to the same underlying thesis so you can see them together and compare how the group has performed against the S&P 500.

Is VELO a large company?

+

No. As of October 16, 2026 Velo3D had a market value of about $223 million and about 134 employees, with trailing revenue of roughly $58 million. Company size affects liquidity and volatility, and the stock has moved between about $3.75 and $31.75 over the past 52 weeks.

How did Velo3D do in its latest quarter?

+

In Q2 2026 Velo3D reported revenue of about $20.7 million, up roughly 52% year over year, gross margin of about 21.5%, and a GAAP net loss of about $11.5 million; EPS of -$0.30 was slightly below the -$0.27 estimate. Backlog reached about $31 million and 2026 revenue guidance was raised to $65-75 million. On October 15, 2026 it guided preliminary Q3 revenue to $19.5-20.5 million, with full results expected the week of November 9.

How has VELO stock performed in 2026?

+

As of the October 16, 2026 close near $6.93, VELO was down about 58% year to date, about 39% over three months and about 35% over one month, after the CFO's departure was announced on October 5. It was still up about 20% over one year. These are historical figures, not a forecast.

Guides that feature VELO

VELO is one of the names covered in these guides. Each one puts the stock next to its peers so you can see where it fits rather than judging it alone.

Walnut is informational, not investment advice. Financial figures on this page are approximations; always verify current numbers with Velo3D, Inc.'s investor relations page or your broker before making investment decisions.