EPAC vs SWK: Which Is the Better Buy in 2026?
Last updated November 2026
Short answer
SWK is the larger of the two ($15.79B market cap): the incumbent the market prices for continued execution (16.14x forward earnings, beta 1.16). EPAC is the smaller challenger ($1.90B), priced similarly on forward earnings (15.29x): more room to run, but more to prove. EPAC is expected to grow revenue faster (8% vs 1% next year) at a similar price (15.29x vs 16.14x forward earnings). The case for SWK rests on its own driver (Cost-reduction and margin recovery): if you believe in that, SWK fits; if you believe in what the numbers show today, EPAC does.
EPAC vs SWK: the tie-breaker metrics
Same yardstick, side by side (as of November 2026). Valuation lined up like this is most meaningful for two names in the same corner of the market, which these are. Figures are approximate; verify before investing.
| Metric | EPAC | SWK | What it tells you |
|---|---|---|---|
| Market cap | $1.90B | $15.79B | Size. The larger name is the incumbent; the smaller has more room to grow and more to prove. |
| Forward P/E | 15.29 | 16.14 | Valuation on next year's expected earnings, the same yardstick for both. Lower is cheaper for that growth; higher means the market is paying up. |
| Trailing P/E | 21.49 | 19.03 | Valuation on the last 12 months. A big drop from trailing to forward means the market expects earnings to jump, so more growth is already in the price. |
| Beta | 0.81 | 1.16 | Volatility vs the market. Above 1 swings harder than the index; below 1 is steadier. Higher beta means bigger drawdowns to hold through. |
| Price vs 52-week range | 40% of range | 72% of range | Where today's price sits between the 52-week low and high. Near the high is momentum with less margin of safety; near the low is out of favor or a discount, depending on why. |
| Price / book | 4.17 | 1.79 | How much you pay over book value. Very high can signal an asset-light, high-return business or a rich price. |
Before you buy: how EPAC and SWK affect your concentration
The metrics above tell you which is the marginally better business. The bigger risk for most people is not picking the slightly worse stock, it is over-concentrating. EPAC and SWK share themes, so owning both, or adding either to what you already hold, can quietly push a large share of your portfolio into one bet.
This is the part a generic comparison page cannot answer, because it depends on what you own. Connect your brokerage and Walnut shows your real, combined EPAC and SWK exposure, flags overlap with your existing positions, and tells you if adding one would tip you past a concentration you are comfortable with, read-only by default, with your login staying at your broker. Walnut is not an investment adviser.
What does Enerpac Tool Group (EPAC) do?
Enerpac Tool Group is what remains of the old Actuant Corporation after it sold off its other businesses between 2019 and 2020 and kept the industrial tools line. Its main segment, Industrial Tools & Service (IT&S), sells hydraulic cylinders, pumps, torque wrenches, bolt tensioners, jacks and heavy-lift systems under the Enerpac, Hydratight, Larzep and DTA brands. These are the tools crews use to tighten bolts on wind turbines, lift bridge sections, keep refinery flanges sealed and position heavy machinery. A smaller service business sends technicians to do that work on site, mostly at energy and power plants. A minor biomedical textile unit, Cortland Biomedical, accounts for about 4% of sales. The company sells in more than 100 countries, mostly through industrial distributors.
What does Stanley Black & Decker (SWK) do?
Stanley Black & Decker, Inc. (NYSE: SWK) is a worldwide leader in tools and outdoor products, founded in 1843 and employing roughly 41,000 people. Its portfolio includes marquee brands such as DEWALT (professional power tools), Craftsman, Black+Decker, and Stanley hand tools and storage, plus outdoor and lifestyle products and a range of digital jobsite solutions. Beyond tools, it runs an Engineered Fastening business that supplies fasteners and fastening systems to automotive and aerospace customers. The company reports primarily through its Tools & Outdoor and Industrial (Engineered Fastening) segments.
EPAC vs SWK: how do they differ?
Both fit overlapping themes, but they are not interchangeable. Here is what each one depends on.
- EPAC drivers: SFE Group integration and synergies; Product momentum in the Americas.
- SWK drivers: Cost-reduction and margin recovery; Strong, well-known brands.
Which fits which kind of investor
A faster-growing, richer-valued name usually swings harder, so it suits a longer horizon and a higher tolerance for volatility; a steadier, more cash-generative business suits a more conservative or income-minded investor. A useful test is which set of risks you could hold through a drawdown: The main risk is execution on SFE Group. For SWK, the main risk is cyclical end-market demand: tool sales track construction, housing turnover, home improvement, and consumer spending, so a weak housing market or cautious consumer can pressure volumes and undercut the margin recovery.
EPAC or SWK: which should you pick?
If the story you believe is EPAC's (SFE Group integration and synergies), EPAC is the more direct way to own it; if it is SWK's (Cost-reduction and margin recovery), SWK is. Many investors hold both, but since they share themes, that is a concentrated bet, not diversification. Decide deliberately and check overlap. For the full detail, see the EPAC and SWK guides.
EPAC vs SWK: the full fundamentals
EPAC. At $37.00 and ~51 million diluted shares, Enerpac's equity is worth roughly $1.9 billion. Adding the ~$450 million in net debt expected after the SFE close puts enterprise value near ~$2.35 billion, or under 12x the fiscal 2027 adjusted EBITDA guidance midpoint of ~$200 million, a moderate multiple for a niche tool company with ~49% gross margins. The forward P/E of ~15x uses analysts' fiscal 2028 EPS of ~$2.42; on fiscal 2027 guidance it is closer to 18x. Most of the upside in these numbers depends on SFE delivering what guidance assumes.
SWK. Stanley Black & Decker in late 2026 is a margin-recovery story that the market has paid for: the stock is up ~70% in a year on four straight earnings beats that came from cost savings rather than sales growth. At ~16 times forward earnings and a ~3.1% yield it is priced well above trough levels, and the average analyst target of ~$115 sits only modestly above the share price. The next leg depends on whether demand eventually adds to what the cost program has delivered, with fourth-quarter results expected around February 3, 2027.
Headline figures (approximate, November 2026): EPAC shows revenue (fy2026, ended aug 31) ~$652 million (Q4 up ~11% to ~$186 million), margins (fy2026, gaap) ~49% gross, ~20% operating, ~14% net, eps (fy2026) ~$1.87 adjusted (GAAP ~$1.72), fy2027 adjusted eps guidance ~$2.00 to $2.15; SWK shows revenue (ttm) ~$15.2B, roughly flat year over year (Q3 2026 down ~0.7%), margins (ttm) ~32% gross, ~7.7% operating, ~5.5% net, net income (ttm) ~$841M (~$5.58 per share), q3 2026 adjusted eps ~$2.31 vs ~$1.56 consensus; revenue ~$3.73B.
The bottom line: EPAC vs SWK
EPAC and SWK are related but distinct: same themes, different businesses and risks. Neither wins in the abstract, and whichever you pick is worth sizing so one theme does not take over your portfolio. Walnut can show your combined EPAC and SWK exposure against your real portfolio. It is not an investment adviser.
Wondering how EPAC or SWK fits the portfolio you already own? Walnut is an AI investing app that connects your brokerage read-only and answers questions like that about your actual holdings: overlap, concentration, and how each position tracks the S&P 500. Compare the best AI portfolio analyzers or see the best AI investing apps in 2026.
Your questions about Enerpac Tool Group
Ask Walnut's AI anything about EPAC and see how it fits what you own.
FAQ
What is the difference between EPAC and SWK?
+
Enerpac Tool Group is what remains of the old Actuant Corporation after it sold off its other businesses between 2019 and 2020 and kept the industrial tools line. Stanley Black & Decker, Inc. They show up together because they share investment themes, but they are different businesses, so the better fit depends on which thesis you are expressing.
Is EPAC or SWK the better stock?
+
Neither is universally better. SWK is the larger incumbent; EPAC is the smaller challenger and looks cheaper on forward earnings. Walnut is informational, not investment advice. Compare what each does, the tie-breaker metrics above, and the risks, then decide which fits your thesis and what you already own.
Which is cheaper, EPAC or SWK?
+
On forward P/E (as of November 2026), EPAC trades at 15.29x and SWK at 16.14x, so EPAC is the cheaper of the two on next year's expected earnings. A lower multiple is not automatically the better buy: a richer valuation can be justified by faster growth, and a lower one can reflect real risk. Weigh the multiple against how fast each business is compounding.
Should you own both EPAC and SWK?
+
Because they share themes, owning both concentrates you in that theme. That can be intentional (a focused bet) or accidental (less diversification than it looks). Walnut can show your combined exposure across both, and whether adding either over-concentrates you, before you buy.
What are the risks of EPAC vs SWK?
+
EPAC: The main risk is execution on SFE Group. It is a 12-brand portfolio assembled by a private equity owner (Gladstone Investment), and combining brands, distributors and factories can easily take longer than a three-year synergy plan. With leverage now near ~2.8x, Enerpac has much less room for error than it did with net debt of almost zero, and a rising-rate period or an earnings miss would cost more. The core business is cyclical: demand ties to oil and gas maintenance, power generation, infrastructure and heavy industry, and a manufacturing slowdown or lower energy capital spending would hit volumes. Service revenue fell in fiscal 2026 before recovering in Q4, which shows how lumpy project work can be. The Q4 margin drop may not be one-off, and the company does not yet have a track record of handling fast growth without cost creep. Tariffs and trade restrictions affect sourcing and pricing, and guidance assumes no major change there. Roughly half of sales come from outside the US, which exposes results to the dollar. Goodwill will rise sharply with SFE, adding impairment risk if the business underperforms. SWK: The main risk is cyclical end-market demand: tool sales track construction, housing turnover, home improvement, and consumer spending, so a weak housing market or cautious consumer can pressure volumes and undercut the margin recovery. Tariffs and trade policy are a live concern for a company that manufactures and sources globally, adding cost volatility that management must offset through pricing and supply-chain moves. Commodity and input costs, plus foreign-exchange swings across international operations, can compress margins. The turnaround itself carries execution risk: cost savings must be sustained rather than one-time, and growth investments in outdoor and other categories can dilute near-term margins. Competition is intense, especially against Techtronic's Milwaukee and Bosch in cordless power tools, where battery technology and professional loyalty are key battlegrounds. Finally, the dividend, while long-standing, ultimately depends on cash flow holding up through the recovery. After a ~70% one-year gain the valuation leaves less room for disappointment than it did at the 52-week low of ~$62.70, and the consensus rating has settled at hold, with Mizuho moving to Neutral in November 2026. Revenue has also yet to grow: the third quarter was down ~0.7% year over year.
Walnut is informational, not investment advice. This page is descriptive and not a recommendation to buy or sell EPAC or SWK; figures are approximate and dated (as of November 2026). Verify current data before investing.