Enerpac Tool Group Corp. (EPAC) Stock Price & How to Invest

Last updated November 2026

Short answer

Enerpac Tool Group (EPAC) is a Milwaukee maker of high-pressure hydraulic tools, bolting gear and heavy-lifting systems, plus the on-site service crews that use them. At $37.00 on November 20, 2026 it trades near ~18x its fiscal 2027 adjusted EPS guidance, with the shares down about 6.5% year to date and roughly flat over one year. The story now hinges on SFE Group, a ~$472 million welding and machining tool buy that closed October 28, 2026 and lifts debt from almost nothing to roughly 2.8x EBITDA.

EPAC stock price

As of 2026-11-20, Enerpac Tool Group Corp. (EPAC) last closed at $36.36, down 3.8% over the past year. Over the past 52 weeks it has traded between $32.93 and $43.45.

EPAC last close
$36.36
1 day
-3.55%
1 month
+2.54%
1 year
-3.78%
52-week range
$32.93 to $43.45
Last close
2026-11-20

Prices are daily closing prices from Yahoo Finance and may be delayed. For the live quote, check your broker or Enerpac Tool Group Corp.'s investor relations page. Walnut is informational, not investment advice.

EPAC key stats

At $36.36 on November 20, 2026, Enerpac Tool Group Corp. (EPAC) has a market cap of $1.9B, a P/E of 21.1 on trailing earnings (15.0 on forward earnings) and a dividend yield of 0.11%. It next reports earnings around December 16, 2026 (estimated).

Market cap
$1.9B
P/E (trailing)
21.1
P/E (forward)
15.0
EPS (trailing 12 months)
$1.72
Price to book
4.1
Dividend yield
0.11%
Beta
0.81
Next earnings
around December 16, 2026 (estimated)

Market cap, P/E and yield are measured at the $36.36 price on November 20, 2026, from Yahoo Finance figures pulled in November 2026. Earnings date from Yahoo Finance. Walnut is informational, not investment advice.

What's new with Enerpac Tool Group Corp. (EPAC)?

The last two weeks for Enerpac Tool Group Corp., as of November 22, 2026: the price move, the next earnings date, and what analysts changed.

  • EPAC closed at $36.36 on November 20, 2026, down 7.6% over the past five trading days (from $39.37).
  • Enerpac Tool Group Corp. next reports quarterly results around December 16, 2026 (estimated).

Prices are daily closes from Yahoo Finance. Analyst actions come from Yahoo Finance as of November 2026. Walnut is informational, not investment advice.

What does Enerpac Tool Group Corp. (EPAC) do?

Enerpac Tool Group is what remains of the old Actuant Corporation after it sold off its other businesses between 2019 and 2020 and kept the industrial tools line. Its main segment, Industrial Tools & Service (IT&S), sells hydraulic cylinders, pumps, torque wrenches, bolt tensioners, jacks and heavy-lift systems under the Enerpac, Hydratight, Larzep and DTA brands. These are the tools crews use to tighten bolts on wind turbines, lift bridge sections, keep refinery flanges sealed and position heavy machinery. A smaller service business sends technicians to do that work on site, mostly at energy and power plants. A minor biomedical textile unit, Cortland Biomedical, accounts for about 4% of sales. The company sells in more than 100 countries, mostly through industrial distributors.

Fiscal 2026 ended August 31. Net sales rose ~6% to ~$652 million, the company's best year since the 2019 relaunch, with organic growth of ~4%. The fourth quarter was stronger: sales up ~11% to ~$186 million, organic growth ~10%, IT&S product sales up ~11% and service up ~9%. Margins went the other way, though. Q4 gross margin fell to ~47.0% from ~50.1% and adjusted EBITDA margin to ~22.6% from ~26.5%, which management put down to mix, higher incentive pay and growth spending. Full-year adjusted EPS came in at ~$1.87 (GAAP ~$1.72). Free cash flow rose ~30% to ~$120 million, and the company spent ~$81 million on buybacks.

The picture changed on October 28, 2026, when Enerpac closed its ~$472 million purchase of SFE Group, a Houston maker of portable machining, orbital welding, pipe preparation and material-lifting equipment that owns 12 brands, including Climax, Axxair and Magnatech. SFE brought ~$170 million of trailing sales and ~$44 million of adjusted EBITDA. Fiscal 2027 guidance, which counts about ten months of SFE, calls for net sales of ~$825 to $845 million, adjusted EBITDA of ~$195 to $205 million and adjusted EPS of ~$2.00 to $2.15. At $37.00 (November 20, 2026) the stock trades around 20x trailing adjusted EPS and roughly 18x the guidance midpoint, for a market value near $1.9 billion. The shares are down about 6.5% in 2026 and sit in a 52-week range of about $32 to $44. The open question is whether a company that built its reputation on margin discipline can absorb a deal worth about a quarter of its market value while carrying debt for the first time in years.

What's driving Enerpac Tool Group Corp. (EPAC)?

1. SFE Group integration and synergies

SFE Group is the biggest swing factor for fiscal 2027. Enerpac paid ~$472 million, about 10.6x SFE's trailing adjusted EBITDA of ~$44 million, or ~9.5x after synergies it expects to realize within three years. SFE runs at roughly 26% EBITDA margins, above Enerpac's ~23.7% fiscal 2026 level, so a clean integration should lift the blend. Guidance implies SFE adds about $140 to $150 million of sales over ten months. Management says it will roll out its PEP productivity program and ECX commercial playbook to the new brands and sell them through Enerpac's distributors. The deal also adds about $1 billion of addressable market in welding, cutting and machining, where Enerpac had little presence.

2. Product momentum in the Americas

The fourth quarter showed the core product line picking back up. IT&S product sales rose ~11% organically, and management called the strength in the Americas broad-based. Segment sales grew from ~$138 million in Q1 to ~$179 million in Q4, an unusually steep climb through the year. Infrastructure spending, power generation and grid work, and maintenance at industrial plants all use Enerpac's bolting and lifting tools. Pricing has also helped. Guidance assumes ~4% to 6% organic growth in fiscal 2027, above the ~4% just delivered, so the plan assumes current demand holds rather than accelerates. Distributor restocking and capital project timing could still make individual quarters uneven.

3. Margin recovery after a weak Q4

Margins are where the fiscal 2026 numbers looked weakest. Gross margin fell to ~49.2% for the year from ~50.5%, and Q4 adjusted EBITDA margin dropped about four points to ~22.6% even as sales jumped 11%. SG&A rose ~$9 million year over year in the quarter, driven by incentive pay and spending on innovation and sales coverage. The fiscal 2027 guidance midpoint of ~$200 million in adjusted EBITDA on ~$835 million of sales implies a ~24% margin, which assumes SFE's higher margins and some recovery in the core business. If Q4's mix pressure turns out to be structural rather than a timing issue, that target will be hard to reach.

4. Balance sheet and capital allocation

Before the deal, Enerpac had almost no net debt: ~$175 million of cash against ~$182 million of borrowings at August 31, 2026, or ~0.1x EBITDA. It used that room for buybacks, retiring ~$81 million of stock in fiscal 2026 and ~$69 million in fiscal 2025, which cut diluted shares from ~54.5 million to ~52.2 million. Paying for SFE with cash and an enlarged $625 million revolver pushes leverage to roughly 2.8x at closing. Paying that down will likely come before large repurchases. With ~$120 million of annual free cash flow, plus SFE's contribution, leverage could fall meaningfully within two years. The dividend is a token ~$0.04 per share a year.

What are the risks to Enerpac Tool Group Corp. (EPAC)?

The main risk is execution on SFE Group. It is a 12-brand portfolio assembled by a private equity owner (Gladstone Investment), and combining brands, distributors and factories can easily take longer than a three-year synergy plan. With leverage now near ~2.8x, Enerpac has much less room for error than it did with net debt of almost zero, and a rising-rate period or an earnings miss would cost more. The core business is cyclical: demand ties to oil and gas maintenance, power generation, infrastructure and heavy industry, and a manufacturing slowdown or lower energy capital spending would hit volumes. Service revenue fell in fiscal 2026 before recovering in Q4, which shows how lumpy project work can be. The Q4 margin drop may not be one-off, and the company does not yet have a track record of handling fast growth without cost creep. Tariffs and trade restrictions affect sourcing and pricing, and guidance assumes no major change there. Roughly half of sales come from outside the US, which exposes results to the dollar. Goodwill will rise sharply with SFE, adding impairment risk if the business underperforms.

Is EPAC a buy or a sell?

We give no verdict on Enerpac Tool Group Corp.. Both cases are real, which is why the question is contested at all, so here is the strongest version of each.

The case for buying. SFE Group integration and synergies. SFE Group is the biggest swing factor for fiscal 2027.

The case against. The main risk is execution on SFE Group.

Read the full bull and bear case on EPAC, including what would have to change to break either one. Walnut is not an investment adviser.

How is Enerpac Tool Group Corp. (EPAC) valued?

Market cap, P/E and dividend yield at today's price are in the EPAC key stats above. The business figures below come from Enerpac Tool Group Corp.'s reported results as of November 2026 and change when it next reports.

  • Revenue (FY2026, ended Aug 31): ~$652 million (Q4 up ~11% to ~$186 million)
  • Margins (FY2026, GAAP): ~49% gross, ~20% operating, ~14% net
  • FY2027 adjusted EPS guidance: ~$2.00 to $2.15
  • Free cash flow (FY2026): ~$120 million (company figure)

As of November 2026: At $37.00 and ~51 million diluted shares, Enerpac's equity is worth roughly $1.9 billion. Adding the ~$450 million in net debt expected after the SFE close puts enterprise value near ~$2.35 billion, or under 12x the fiscal 2027 adjusted EBITDA guidance midpoint of ~$200 million, a moderate multiple for a niche tool company with ~49% gross margins. The forward P/E of ~15x uses analysts' fiscal 2028 EPS of ~$2.42; on fiscal 2027 guidance it is closer to 18x. Most of the upside in these numbers depends on SFE delivering what guidance assumes.

Who competes with Enerpac Tool Group Corp. (EPAC)?

Industrial bolting and hydraulic tools

In torque, tensioning and high-pressure hydraulics, Enerpac's closest rivals are privately held HYTORC, ITH Bolting Technology and Holmatro, plus the tools divisions of Atlas Copco (Sweden) and Stanley Black & Decker. They compete for the same refinery, wind and heavy-construction jobs, mostly on reliability, safety certifications and how fast distributors can deliver.

Welding, cutting and portable machining

With SFE Group, Enerpac now competes with Lincoln Electric (LECO) and ESAB (ESAB) in orbital welding and pipe preparation, and with specialty makers such as Tri Tool, Esco Tool and Wachs in portable machining. These markets are fragmented, which is part of the deal's appeal.

On-site industrial services

Enerpac's service crews, largely the Hydratight business, compete with Team Inc. (TISI), Mistras Group (MG) and regional bolting and machining contractors for plant turnaround and maintenance work. This work is lower margin and lumpier than tool sales, and it depends on customers' maintenance budgets and outage schedules.

What stocks are similar to Enerpac Tool Group Corp. (EPAC)?

Other names that sit close to EPAC: same theme, named as a direct competitor, or held beside it in the same funds. Each entry says which. They are useful if you want to spread one thesis across several tickers.

How to invest in Enerpac Tool Group Corp. (EPAC)

There are three common ways to get EPAC exposure. Buy shares (or fractional shares) directly at any major broker. Hold an ETF that includes it, which spreads the position across many companies. Or build it into a focused thematic portfolio, so EPAC sits alongside other stocks that express the same thesis.

Walnut takes the portfolio route. Describe a thesis where EPAC fits (for example “AI infrastructure” or “dividend-growth large-caps”) and the AI proposes 5 to 6 constituents with target weights. You review the plan and fund it through your own broker when you're ready.

New to this? Start with how to invest in stocks, see how to analyze a stock with AI, or compare the best AI stock analyzers.

The bottom line on Enerpac Tool Group Corp. (EPAC)

EPAC is a high-margin niche tool franchise with clean cash flow, now taking on its biggest acquisition in years. The SFE Group integration and industrial demand decide whether fiscal 2027 guidance holds; the first quarter that includes SFE is due around December 16, 2026.

More on Enerpac Tool Group Corp. (EPAC)

Whether EPAC is worth buying today depends more on your time horizon and what you already hold than on any single call. We walk through valuation, what would have to go right, and the risks in is EPAC a buy or a sell?, and where the stock could go from here in the EPAC stock forecast.

For income investors, whether EPAC pays a dividend and how the payout looks is covered in does EPAC pay a dividend? And to weigh EPAC against a peer, read the full side-by-side comparisons: EPAC vs ATLKY and EPAC vs SWK.

Wondering how EPAC fits the portfolio you already own? Walnut is an AI investing app that connects your brokerage read-only and answers questions like that about your actual holdings: overlap, concentration, and how each position tracks the S&P 500. Compare the best AI portfolio analyzers or see the best AI investing apps in 2026.

Your questions about Enerpac Tool Group Corp.

Ask Walnut's AI anything about EPAC and see how it fits what you own.

FAQ

What does Enerpac Tool Group do?

+

Enerpac designs and sells high-pressure hydraulic and mechanical tools for heavy industrial work: cylinders, pumps, jacks, torque wrenches, bolt tensioners and systems that lift and position very heavy loads. Customers include oil and gas, power generation, wind energy, mining, infrastructure and general manufacturing. Most of its ~$652 million of fiscal 2026 sales came from the Industrial Tools & Service segment, which also runs field service crews that do bolting, machining and joint-integrity work on site. A small biomedical textiles unit, Cortland Biomedical, makes up the rest. Since October 28, 2026, the company also owns SFE Group, adding portable machining, orbital welding, pipe preparation and material-lifting equipment under 12 brands. Enerpac is headquartered in Milwaukee, Wisconsin, traces its roots to 1910, and trades on the NYSE as EPAC.

How did Enerpac do in fiscal 2026?

+

For the year ended August 31, 2026, net sales rose ~6% to ~$652 million, with organic growth of ~4% (IT&S up ~3%, Cortland Biomedical up ~23%). GAAP net earnings dipped to ~$89.7 million from ~$92.7 million because of lower service volume early in the year, higher incentive pay and spending on growth, but buybacks lifted diluted EPS slightly to ~$1.72. Adjusted EPS rose to ~$1.87 from ~$1.81. Adjusted EBITDA was ~$154 million at a ~23.7% margin. The fourth quarter stood out: sales up ~11% to ~$186 million and ~10% organic growth, though margins narrowed. Cash flow was the cleanest part of the year, with ~$130 million from operations and ~$120 million of free cash flow, up ~30%.

What is the SFE Group acquisition?

+

SFE Group (Specialized Fabrication Equipment Group) is a Houston company that makes portable machining tools, orbital welding systems, pipe cutting and beveling equipment, and material lifts. Its 12 brands include Climax, B&B Sumner, Axxair, Magnatech, Mathey Dearman and Bortech. Enerpac agreed in July 2026 to buy it from SFEG Holdings, a Gladstone Investment portfolio company, for ~$472 million, and closed the deal on October 28, 2026. SFE had ~$170 million of trailing sales and ~$44 million of adjusted EBITDA, so the price was ~10.6x EBITDA, or ~9.5x including planned synergies. Enerpac says the deal adds about $1 billion of addressable market and expects it to add to adjusted EPS in fiscal 2027. It is the company's largest acquisition since becoming a pure-play tools business.

What is Enerpac's fiscal 2027 guidance?

+

For the year ending August 2027, Enerpac guides to net sales of ~$825 to $845 million, organic growth of ~4% to 6%, adjusted EBITDA of ~$195 to $205 million and adjusted diluted EPS of ~$2.00 to $2.15. The range includes about ten months of SFE Group, which closed early in the fiscal year. The jump in sales from ~$652 million is mostly the acquisition, while the EBITDA target implies margins of roughly 24%, a bit above fiscal 2026. Guidance assumes current exchange rates and no substantial change in tariffs or regulation. An Investor Day at the New York Stock Exchange was scheduled for November 4, 2026 to cover longer-term targets. Analyst consensus for the full year sits near ~$832 million of revenue and ~$2.06 of EPS.

Is EPAC stock expensive?

+

On the usual measures it looks moderate rather than cheap or stretched. At $37.00 on November 20, 2026, EPAC trades around 20x fiscal 2026 adjusted EPS of ~$1.87 and roughly 18x the fiscal 2027 guidance midpoint of ~$2.08. Enterprise value of about $2.35 billion, including post-deal debt, is just under 12x guided fiscal 2027 adjusted EBITDA. For context, the company earns ~49% gross margins and has turned most of its earnings into cash, which supports a premium to commodity industrial companies. Against that, the multiple now depends partly on an acquisition that has just closed, and recent quarters showed margin pressure. Whether the price seems reasonable depends on how much weight one gives to SFE synergies and to the durability of industrial demand. Walnut is not an investment adviser.

Does Enerpac pay a dividend?

+

Yes, but it is small. Enerpac pays an annual dividend of ~$0.04 per share, a yield of about 0.1% at the November 2026 price of $37, and spent only ~$2 million on dividends in fiscal 2026. Share buybacks have been the main way it returns cash: ~$81 million in fiscal 2026 and ~$69 million in fiscal 2025, which cut the diluted share count from ~54.5 million to ~52.2 million over the year. With net debt rising to roughly 2.8x EBITDA after the SFE purchase, management will probably shift free cash flow toward paying down debt for a while, so the pace of repurchases may slow. Anyone looking at EPAC for income would find little here. The case rests on earnings growth and cash generation, not payouts.

What end markets matter most for Enerpac?

+

Enerpac's tools go wherever large bolts need tightening or heavy loads need moving with precision. Historically, oil and gas (refinery and pipeline maintenance) and power generation have been big drivers, especially for the service business, which follows plant outage and turnaround schedules. Infrastructure (bridges, rail, civil construction), wind energy, mining, aerospace and general manufacturing round out the mix. Recent product growth has been strongest in the Americas. SFE Group adds exposure to fabrication, welding and pipe work in industries such as power, semiconductors, aerospace and shipbuilding. That diversity cushions any single sector, but almost all of it is industrial capital and maintenance spending, so a broad manufacturing or energy downturn would show up in Enerpac's order book.

What are the biggest risks for EPAC shareholders?

+

Four stand out. First, the SFE integration: Enerpac paid ~$472 million for a 12-brand business and has to deliver synergies over three years without disrupting either company's distributor relationships. Second, leverage: net debt moves from ~0.1x to roughly 2.8x EBITDA, which reduces flexibility if earnings weaken. Third, cyclicality: demand depends on energy, power, infrastructure and industrial maintenance budgets, and service revenue can swing with project timing. Fourth, margins: Q4 fiscal 2026 adjusted EBITDA margin fell about four points year over year despite strong sales, and guidance assumes recovery. Tariffs, foreign exchange (about half of sales are international) and possible goodwill impairment are secondary risks. None of these is unusual for a mid-cap industrial, but the acquisition concentrates them in fiscal 2027.

How has EPAC stock performed this year?

+

As of the November 20, 2026 close of $37.00, Enerpac shares were down about 6.5% year to date and about 0.5% over one year, inside a 52-week range of roughly $32 to $44. The stock rose about 3% over the prior month but was slightly lower over three months, a period that covered the fiscal fourth-quarter report, with its weaker margins, and the closing of the ~$472 million SFE Group purchase. The two analysts in Yahoo's consensus carry a mean target of $54 and a buy rating. Walnut is not an investment adviser.

When does Enerpac report next?

+

Enerpac's fiscal first quarter (September to November 2026) is expected to be reported around December 16, 2026. It will be the first quarter to include SFE Group, for roughly one month. Consensus sits near $0.34 of EPS on ~$167 million of revenue, against $0.36 a year earlier. The figures that will draw attention are how much SFE contributed, whether core organic growth held near the ~10% of the fourth quarter, and whether gross margin recovered from the ~47% fourth-quarter level. In the last four quarters Enerpac met or beat the EPS consensus three times, with one small miss.

Walnut is informational, not investment advice. Financial figures on this page are approximations; always verify current numbers with Enerpac Tool Group Corp.'s investor relations page or your broker before making investment decisions.